j... U-Boot SPL 2022.10spacemit-gdb67f9dc4-dirty (Sep 25 2025 - 07:00:37 +0000) [ 11.118] DDR type LPDDR4X [ 11.118] set ddr tx odt to 80ohm! [ 11.133] lpddr4_silicon_init consume 15ms [ 11.134] Change DDR data rate to 2400MT/s [ 13.158] ......## Checking hash(es) for config conf-1 ... OK [ 13.191] ## Checking hash(es) for Image opensbi ... OK [ 13.196] ## Checking hash(es) for Image uboot ... OK [ 13.201] ## Checking hash(es) for Image fdt-1 ... OK U-Boot 2026.10-rc5-g009e916e497b (Sep 29 2026 - 09:50:53 +0800) DRAM: 4 GiB Core: 338 devices, 22 uclasses, devicetree: separate MMC: spacemit_pinctrl pinctrl@d401e000: Invalid power source (3300) mmc@d4280000: 1, mmc@d4281000: 0 Loading Environment from nowhere... OK In: serial@d4017000 Out: serial@d4017000 Err: serial@d4017000 Net: No ethernet found. => pci enum PCIE-0: Link up (Gen1-x2, Bus0) PCIE-2: Link down => pci BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ 00.00.00 0x201f 0x0001 Bridge device 0x04 PCIE-2: Link down 01.00.00 0x8086 0xf1a5 Mass storage controller 0x08 => nvme scan => nvme info Device 0: Vendor: 0x8086 Rev: PSF121L Prod: BTPY71920GCL128A Type: Hard Disk Capacity: 122104.3 MB = 119.2 GB (250069680 x 512) => setenv kernel_addr_r 0x10000000 => setenv ramdisk_addr 0x20000000 => setenv fdt_addr_r 0x1F000000 => ext4load nvme 0:1 ${kernel_addr_r} /Image 27515392 bytes read in 111 ms (236.4 MiB/s) => ext4load nvme 0:1 ${ramdisk_addr} /rootfs.cpio 2465280 bytes read in 10 ms (235.1 MiB/s) => ext4load nvme 0:1 ${fdt_addr_r} /k1-bananapi-f3.dtb 32700 bytes read in 0 ms => setenv bootargs console=ttyS0,115200 earlycon=sbi rdinit=/init ignore_loglevel => ext4load nvme 0:1 ${ramdisk_addr} /rootfs.cpio 2465280 bytes read in 10 ms (235.1 MiB/s) => setenv ramdisk_size ${filesize} => booti ${kernel_addr_r} ${ramdisk_addr}:${ramdisk_size} ${fdt_addr_r} Moving Image from 0x10000000 to 0x200000, end=0x1cb5000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Working FDT set to 1f000000 Loading Ramdisk to 7ebda000, end 7ee33e00 ... OK Loading Device Tree to 000000007ebcf000, end 000000007ebd9fbb ... OK Working FDT set to 7ebcf000 Starting kernel ... [ 0.000000] Booting Linux on hartid 0 [ 0.000000] Linux version 7.2.0 (PIO-2023US-TR4-02-BS010) (riscv64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for 6 [ 0.000000] Machine model: Banana Pi BPI-F3 [ 0.000000] SBI specification v1.0 detected [ 0.000000] SBI implementation ID=0x1 Version=0x10003 [ 0.000000] SBI IPI extension detected [ 0.000000] SBI RFENCE extension detected [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '') [ 0.000000] Malformed early option 'earlycon' [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] efi: UEFI not found. [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable mmode_resv0@0 [ 0.000000] SBI HSM extension detected [ 0.000000] riscv: base ISA extensions acdfimv [ 0.000000] riscv: ELF capabilities acdfimv [ 0.000000] Ticket spinlock: enabled [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] [ 0.000000] node 0: [mem 0x0000000000080000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000017fffffff] [ 0.000000] percpu: Embedded 31 pages/cpu s88152 r8192 d30632 u126976 [ 0.000000] pcpu-alloc: s88152 r8192 d30632 u126976 alloc=31*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=sbi rdinit=/init ignore_loglevel [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x000000007abcf000-0x000000007ebcf000] (64MB) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] riscv-intc: 64 local interrupts mapped [ 0.000000] riscv: providing IPIs using SBI IPI extension [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000009] riscv-timer: Timer interrupt in S-mode is available via sstc extension [ 0.000435] Console: colour dummy device 80x25 [ 0.000497] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000507] pid_max: default: 32768 minimum: 301 [ 0.000892] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000911] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001238] VFS: Finished mounting rootfs on nullfs [ 0.003356] riscv: ELF compat mode unsupported [ 0.003377] ASID allocator using 16 bits (65536 entries) [ 0.003495] rcu: Hierarchical SRCU implementation. [ 0.003499] rcu: Max phase no-delay instances is 1000. [ 0.003713] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.003852] EFI services will not be available. [ 0.004308] smp: Bringing up secondary CPUs ... [ 0.009105] smp: Brought up 1 node, 8 CPUs [ 0.010128] Memory: 3998456K/4194304K available (11467K kernel code, 6032K rwdata, 6144K rodata, 2406K init, 473K bss, 187212K reserved, 0K cma-reserved) [ 0.011817] devtmpfs: initialized [ 0.016919] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.017017] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear). [ 0.017867] DMI: not present or invalid. [ 0.018266] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.018634] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.018712] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.018742] audit: initializing netlink subsys (disabled) [ 0.018987] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 [ 0.019344] thermal_sys: Registered thermal governor 'step_wise' [ 0.019413] cpuidle: using governor menu [ 0.029639] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.029649] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.029654] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.029657] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.030405] ACPI: Interpreter disabled. [ 0.030738] iommu: Default domain type: Translated [ 0.030744] iommu: DMA domain TLB invalidation policy: strict mode [ 0.040550] SCSI subsystem initialized [ 0.040763] libata version 3.00 loaded. [ 0.040909] usbcore: registered new interface driver usbfs [ 0.040936] usbcore: registered new interface driver hub [ 0.040963] usbcore: registered new device driver usb [ 0.041592] Advanced Linux Sound Architecture Driver Initialized. [ 0.042573] vgaarb: loaded [ 0.042918] clocksource: Switched to clocksource riscv_clocksource [ 0.043605] pnp: PnP ACPI: disabled [ 0.050420] NET: Registered PF_INET protocol family [ 0.050648] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.054590] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.054669] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.054681] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.054839] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.055857] TCP: Hash tables configured (established 32768 bind 32768) [ 0.056019] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.056293] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.056897] RPC: Registered named UNIX socket transport module. [ 0.056906] RPC: Registered udp transport module. [ 0.056908] RPC: Registered tcp transport module. [ 0.056910] RPC: Registered tcp-with-tls transport module. [ 0.056913] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.072993] cpu0: scalar unaligned word access speed is 2.18x byte access speed (fast) [ 0.072995] cpu1: scalar unaligned word access speed is 1.49x byte access speed (fast) [ 0.073005] cpu3: scalar unaligned word access speed is 2.13x byte access speed (fast) [ 0.073010] cpu2: scalar unaligned word access speed is 2.20x byte access speed (fast) [ 0.073016] cpu6: scalar unaligned word access speed is 1.95x byte access speed (fast) [ 0.073014] cpu4: scalar unaligned word access speed is 1.99x byte access speed (fast) [ 0.073014] cpu5: scalar unaligned word access speed is 1.91x byte access speed (fast) [ 0.073024] cpu7: scalar unaligned word access speed is 7.59x byte access speed (fast) [ 0.077818] PCI: CLS 0 bytes, default 64 [ 0.078048] Unpacking initramfs... [ 0.079506] workingset: timestamp_bits=46 (anon: 41) max_order=20 bucket_order=0 (anon: 0) [ 0.080551] NFS: Registering the id_resolver key type [ 0.080582] Key type id_resolver registered [ 0.080585] Key type id_legacy registered [ 0.080612] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.080622] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.080873] 9p: Installing v9fs 9p2000 file system support [ 0.081146] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.081375] io scheduler mq-deadline registered [ 0.081383] io scheduler kyber registered [ 0.081424] io scheduler bfq registered [ 0.086328] riscv-plic: interrupt-controller@e0000000: mapped 160 interrupts with 8 handlers for 16 contexts. [ 0.094989] Freeing initrd memory: 2404K [ 0.138064] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.147384] loop: module loaded [ 0.149866] e1000e: Intel(R) PRO/1000 Network Driver [ 0.149875] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.150733] usbcore: registered new interface driver uas [ 0.150780] usbcore: registered new interface driver usb-storage [ 0.151020] mousedev: PS/2 mouse device common for all mice [ 0.183452] mmc0: SDHCI controller on d4281000.mmc [d4281000.mmc] using ADMA [ 0.183746] usbcore: registered new interface driver usbhid [ 0.183751] usbhid: USB HID core driver [ 0.184252] riscv-pmu-sbi: SBI PMU extension is available [ 0.184286] riscv-pmu-sbi: 16 firmware and 18 hardware counters [ 0.186886] NET: Registered PF_INET6 protocol family [ 0.188098] Segment Routing with IPv6 [ 0.188147] In-situ OAM (IOAM) with IPv6 [ 0.188210] NET: Registered PF_PACKET protocol family [ 0.188251] 9pnet: Installing 9P2000 support [ 0.188344] Key type dns_resolver registered [ 0.217061] printk: legacy console [ttyS0] disabled [ 0.217444] d4017000.serial: ttyS0 at MMIO 0xd4017000 (irq = 15, base_baud = 907421) is a XScale [ 0.217489] printk: legacy console [ttyS0] enabled [ 0.279665] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 0.290065] /soc/i2c@d401d800/pmic@41: Fixed dependency cycle(s) with /soc/i2c@d401d800/pmic@41/regulators/buck5 [ 1.160721] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB [ 1.168146] mmcblk0: p1 p2 p3 p4 p5 p6 [ 1.170454] mmcblk0boot0: mmc0:0001 AJTD4R 4.00 MiB [ 1.176184] mmcblk0boot1: mmc0:0001 AJTD4R 4.00 MiB [ 1.179307] spacemit-p1-rtc spacemit-p1-rtc.2.auto: registered as rtc0 [ 1.180821] mmcblk0rpmb: mmc0:0001 AJTD4R 4.00 MiB, chardev (242:0) [ 1.186101] spacemit-p1-rtc spacemit-p1-rtc.2.auto: hctosys: unable to read the hardware clock [ 1.201943] sdhci-spacemit d4280000.mmc: Got CD GPIO [ 1.240294] mmc1: SDHCI controller on d4280000.mmc [d4280000.mmc] using ADMA [ 1.246876] spacemit-k1-pcie ca400000.pcie: host bridge /soc/pcie-bus/pcie@ca400000 ranges: [ 1.246995] spacemit-k1-pcie ca800000.pcie: host bridge /soc/pcie-bus/pcie@ca800000 ranges: [ 1.247288] clk: Disabling unused clocks [ 1.247616] PM: genpd: Disabling unused power domains [ 1.247626] ALSA device list: [ 1.247631] No soundcards found. [ 1.253258] spacemit-k1-pcie ca400000.pcie: IO 0x009f002000..0x009f101fff -> 0x0000000000 [ 1.261749] spacemit-k1-pcie ca800000.pcie: IO 0x00b7002000..0x00b7101fff -> 0x0000000000 [ 1.265632] spacemit-k1-pcie ca400000.pcie: MEM 0x0090000000..0x009effffff -> 0x0090000000 [ 1.270755] spacemit-k1-pcie ca800000.pcie: MEM 0x00a0000000..0x00afffffff -> 0x00a0000000 [ 1.312445] spacemit-k1-pcie ca800000.pcie: MEM 0x00b0000000.[ 1.376711] spacemit-k1-pcie ca400000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G [ 1.421419] mmc1: new UHS-I speed SDR104 SDHC card at address 0001 [ 1.424134] spacemit-k1-pcie ca800000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G [ 1.425742] mmcblk1: mmc1:0001 MSSD0 29.2 GiB [ 1.442737] mmcblk1: p1 p2 p3 p4 p5 p6 [ 1.474940] spacemit-k1-pcie ca400000.pcie: PCIe Gen.1 x2 link up [ 1.478700] spacemit-k1-pcie ca400000.pcie: PCI host bridge to bus 0001:00 [ 1.485459] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.490991] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] [ 1.497332] pci_bus 0001:00: root bus resource [mem 0x90000000-0x9effffff] [ 1.504369] pci 0001:00:00.0: [201f:0001] type 01 class 0x060400 PCIe Root Port [ 1.511721] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x000fffff] [ 1.517697] pci 0001:00:00.0: BAR 1 [mem 0x00000000-0x000fffff] [ 1.523692] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 1.529003] pci 0001:00:00.0: bridge window [io 0x0000-0x0fff] [ 1.535157] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 1.542033] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 1.549918] pci 0001:00:00.0: supports D1 [ 1.553932] pci 0001:00:00.0: PME# supported from D0 D1 D3hot D3cold [ 1.562773] pci 0001:01:00.0: [8086:f1a5] type 00 class 0x010802 PCIe Endpoint [ 1.567922] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 1.574763] pci 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x2 link at 0001:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 lin) [ 1.589637] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.596099] pci 0001:00:00.0: BAR 0 [mem 0x90000000-0x900fffff]: assigned [ 1.602961] pci 0001:00:00.0: BAR 1 [mem 0x90100000-0x901fffff]: assigned [ 1.609829] pci 0001:00:00.0: bridge window [mem 0x90200000-0x902fffff]: assigned [ 1.617411] pci 0001:01:00.0: BAR 0 [mem 0x90200000-0x90203fff 64bit]: assigned [ 1.624865] pci 0001:00:00.0: PCI bridge to [bus 01] [ 1.629843] pci 0001:00:00.0: bridge window [mem 0x90200000-0x902fffff] [ 1.636719] pci_bus 0001:00: resource 4 [io 0x0000-0xfffff] [ 1.642451] pci_bus 0001:00: resource 5 [mem 0x90000000-0x9effffff] [ 1.648794] pci_bus 0001:01: resource 1 [mem 0x90200000-0x902fffff] [ 1.655407] pcieport 0001:00:00.0: PME: Signaling with IRQ 23 [ 2.390927] spacemit-k1-pcie ca800000.pcie: Device found, but not active [ 2.395239] spacemit-k1-pcie ca800000.pcie: PCI host bridge to bus 0002:00 [ 2.402054] pci_bus 0002:00: root bus resource [bus 00-ff] [ 2.407597] pci_bus 0002:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x0000-0xfffff]) [ 2.416940] pci_bus 0002:00: root bus resource [mem 0xa0000000-0xafffffff pref] [ 2.424348] pci_bus 0002:00: root bus resource [mem 0xb0000000-0xb6ffffff] [ 2.431383] pci 0002:00:00.0: [201f:0001] type 01 class 0x060400 PCIe Root Port [ 2.438733] pci 0002:00:00.0: BAR 0 [mem 0x00000000-0x000fffff] [ 2.444713] pci 0002:00:00.0: BAR 1 [mem 0x00000000-0x000fffff] [ 2.450706] pci 0002:00:00.0: PCI bridge to [bus 01-ff] [ 2.455999] pci 0002:00:00.0: bridge window [io 0x100000-0x100fff] [ 2.462519] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 2.469401] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 2.477286] pci 0002:00:00.0: supports D1 [ 2.481299] pci 0002:00:00.0: PME# supported from D0 D1 D3hot D3cold [ 2.490290] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.494466] pci 0002:00:00.0: BAR 0 [mem 0xb0000000-0xb00fffff]: assigned [ 2.501317] pci 0002:00:00.0: BAR 1 [mem 0xb0100000-0xb01fffff]: assigned [ 2.508192] pci 0002:00:00.0: PCI bridge to [bus 01] [ 2.513219] pci_bus 0002:00: resource 4 [io 0x100000-0x1fffff] [ 2.519218] pci_bus 0002:00: resource 5 [mem 0xa0000000-0xafffffff pref] [ 2.525995] pci_bus 0002:00: resource 6 [mem 0xb0000000-0xb6ffffff] [ 2.532651] pcieport 0002:00:00.0: PME: Signaling with IRQ 24 [ 2.539337] Freeing unused kernel image (initmem) memory: 2404K [ 2.544227] Run /init as init process [ 2.547862] with arguments: [ 2.550849] /init [ 2.553146] with environment: [ 2.556321] HOME=/ [ 2.558696] TERM=linux Saving 256 bits of non-creditable seed for next boot Starting syslogd: OK Starting klogd: OK Running sysctl: OK Starting network: OK Starting dhcpcd... dhcpcd-10.2.4 starting [ 6.854931] random: crng init done no valid interfaces found Starting crond: OK Welcome to Buildroot buildroot login: root # # reboot # Stopping crond: stopped /usr/sbin/crond (pid 181) OK Stopping dhcpcd... stopped /sbin/dhcpcd (pid 172) Stopping network: OK Stopping klogd: stopped /sbin/klogd (pid 150) OK Stopping syslogd: stopped /sbin/syslogd (pid 146) OK Seeding 256 bits without crediting Saving 256 bits of creditable seed for next boot umount: devtmpfs busy - remounted read-only The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system reboot[ 62.158489] reboo?sys: 0x600 bm:3 ERROR: sd: invalid bootinfo magic code:0x0 ERROR: invalid bootinfo image. ERROR: entering download mode. ROM: usb download handler usb2d_initialize : enter Controller Run usb rst int SETUP: 0x80 0x6 0x100 usb rst int SETUP: 0x0 0x5 0xa SETUP: 0x80 0x6 0x100 SETUP: 0x80 0x6 0x200 SETUP: 0x80 0x6 0x200 SETUP: 0x80 0x6 0x300 SETUP: 0x80 0x6 0x302 SETUP: 0x80 0x6 0x301 SETUP: 0x80 0x6 0x30a SETUP: 0x0 0x9 0x1 usb_rx_bytes : len= 4096 pBuf= 0xc0838720 SETUP: 0x80 0x6 0x302 SETUP: 0x80 0x6 0x304 fastboot_handle_command: 0002ed40 Starting download of 191808 bytes usb_tx_bytes : len= 65 pBuf= 0xc083fe88 usb_rx_bytes : len= 191808 pBuf= 0xc0800000 usb_tx_bytes : len= 65 pBuf= 0xc083fe88 usb_rx_bytes : len= 4096 pBuf= 0xc0838720 fastboot_handle_command: continue usb_tx_bytes : len= 65 pBuf= 0xc083fe88 j... U-Boot SPL 2022.10spacemit-gdb67f9dc4-dirty (Sep 25 2025 - 07:00:37 +0000) [ 8.003] DDR type LPDDR4X [ 8.003] set ddr tx odt to 80ohm! [ 8.018] lpddr4_silicon_init consume 15ms [ 8.019] Change DDR data rate to 2400MT/s [ 10.042] ......## Checking hash(es) for config conf-1 ... OK [ 10.075] ## Checking hash(es) for Image opensbi ... OK [ 10.081] ## Checking hash(es) for Image uboot ... OK [ 10.086] ## Checking hash(es) for Image fdt-1 ... OK U-Boot 2026.10-rc5-g009e916e497b (Sep 29 2026 - 09:50:53 +0800) DRAM: 4 GiB Core: 338 devices, 22 uclasses, devicetree: separate MMC: spacemit_pinctrl pinctrl@d401e000: Invalid power source (3300) mmc@d4280000: 1, mmc@d4281000: 0 Loading Environment from nowhere... OK In: serial@d4017000 Out: serial@d4017000 Err: serial@d4017000 Net: No ethernet found. => mmc part Partition Map for mmc device 0 -- Partition Type: EFI Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000100 0x000002ff "fsbl" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 guid: 02d15c54-bc31-4201-96d8-67bd2c4ed288 2 0x00000300 0x0000037f "env" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 guid: bad64d83-97c4-4b0a-9baa-7a39ab651ee8 3 0x00000800 0x00000fff "opensbi" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 guid: dfe81dba-dc60-47e7-b243-4070c5d3e97d 4 0x00001000 0x00001fff "uboot" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 guid: 632f4bf0-b0b3-4721-a8dd-0a319fe7523f 5 0x00002000 0x00081fff "bootfs" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 guid: a8cce97c-d62c-41ea-8be6-0a20aeb5bce5 6 0x00082000 0x01d1efde "rootfs" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 guid: 97279b97-437a-4e9e-886b-d0731cc783ab => mmc dev 1 spacemit_pinctrl pinctrl@d401e000: Invalid power source (3300) spacemit_pinctrl pinctrl@d401e000: Invalid power source (3300) spacemit_pinctrl pinctrl@d401e000: Invalid power source (3300) spacemit_pinctrl pinctrl@d401e000: Invalid power source (3300) spacemit_pinctrl pinctrl@d401e000: Invalid power source (3300) spacemit_pinctrl pinctrl@d401e000: Invalid power source (3300) switch to partitions #0, OK mmc1 is current device => mmc part Partition Map for mmc device 1 -- Partition Type: EFI Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000100 0x000002ff "" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 guid: 5c40069c-7554-405c-8066-65df1c788ab8 2 0x00000300 0x0000037f "" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 guid: b6e77c71-5087-4c4b-9422-3f1cb7c22c02 3 0x00000800 0x00000fff "" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 guid: 6210bf94-9c1c-460c-acfb-15b287f5fc43 4 0x00001000 0x00001fff "" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 guid: 0d742c62-9859-4043-be95-9e4ce5348a1b 5 0x00002000 0x00081fff "" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 guid: c6b6fbd5-6f86-4dc3-9ce9-ec553b85df79 6 0x00082000 0x00481fff "" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 guid: 2dbed5ef-8ef7-4bc4-9070-a6bbdad11a2f 7 0x00482000 0x00c81fff "" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 guid: 9ab9080e-4359-4d04-953e-4b39ebb9da14 => ex exit ext4load ext4ls ext4size => ext4ls mmc 1:7 / ./ ../ lost+found/ 2465280 rootfs.cpio 27515392 Image 32700 k1-bananapi-f3.dtb 3 file(s), 3 dir(s) => setenv kernel_addr_r 0x10000000 => setenv ramdisk_addr 0x20000000 => setenv fdt_addr_r 0x1F000000 => ext4load mmc 1:7 ${kernel_addr_r} /Image 27515392 bytes read in 1678 ms (15.6 MiB/s) => ext4load mmc 1:7 ${ramdisk_addr} /rootfs.cpio 2465280 bytes read in 157 ms (15 MiB/s) => setenv ramdisk_size ${filesize} => ext4load mmc 1:7 ${fdt_addr_r} /k1-bananapi-f3.dtb 32700 bytes read in 12 ms (2.6 MiB/s) => booti ${kernel_addr_r} ${ramdisk_addr}:${ramdisk_size} ${fdt_addr_r} Moving Image from 0x10000000 to 0x200000, end=0x1cb5000 ## Flattened Device Tree blob at 1f000000 Booting using the fdt blob at 0x1f000000 Working FDT set to 1f000000 Loading Ramdisk to 7ebda000, end 7ee33e00 ... OK Loading Device Tree to 000000007ebcf000, end 000000007ebd9fbb ... OK Working FDT set to 7ebcf000 Starting kernel ... [ 0.000000] Booting Linux on hartid 0 [ 0.000000] Linux version 7.2.0 (PIO-2023US-TR4-02-BS010) (riscv64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for 6 [ 0.000000] Machine model: Banana Pi BPI-F3 [ 0.000000] SBI specification v1.0 detected [ 0.000000] SBI implementation ID=0x1 Version=0x10003 [ 0.000000] SBI IPI extension detected [ 0.000000] SBI RFENCE extension detected [ 0.000000] efi: UEFI not found. [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable mmode_resv0@0 [ 0.000000] SBI HSM extension detected [ 0.000000] riscv: base ISA extensions acdfimv [ 0.000000] riscv: ELF capabilities acdfimv [ 0.000000] Ticket spinlock: enabled [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] [ 0.000000] node 0: [mem 0x0000000000080000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000017fffffff] [ 0.000000] percpu: Embedded 31 pages/cpu s88152 r8192 d30632 u126976 [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x000000007abcf000-0x000000007ebcf000] (64MB) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] riscv-intc: 64 local interrupts mapped [ 0.000000] riscv: providing IPIs using SBI IPI extension [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000010] riscv-timer: Timer interrupt in S-mode is available via sstc extension [ 0.000435] Console: colour dummy device 80x25 [ 0.000449] printk: legacy console [tty0] enabled [ 0.000797] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000820] pid_max: default: 32768 minimum: 301 [ 0.001216] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001248] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001584] VFS: Finished mounting rootfs on nullfs [ 0.003720] riscv: ELF compat mode unsupported [ 0.003749] ASID allocator using 16 bits (65536 entries) [ 0.003898] rcu: Hierarchical SRCU implementation. [ 0.003912] rcu: Max phase no-delay instances is 1000. [ 0.004183] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.004343] EFI services will not be available. [ 0.004768] smp: Bringing up secondary CPUs ... [ 0.009616] smp: Brought up 1 node, 8 CPUs [ 0.010672] Memory: 3998456K/4194304K available (11467K kernel code, 6032K rwdata, 6144K rodata, 2406K init, 473K bss, 187212K reserved, 0K cma-reserved) [ 0.012388] devtmpfs: initialized [ 0.017384] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.017512] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear). [ 0.018359] DMI: not present or invalid. [ 0.018782] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.019103] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.019192] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.019232] audit: initializing netlink subsys (disabled) [ 0.019477] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 [ 0.019829] thermal_sys: Registered thermal governor 'step_wise' [ 0.019901] cpuidle: using governor menu [ 0.030009] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.030042] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.030057] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.030068] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.030841] ACPI: Interpreter disabled. [ 0.031196] iommu: Default domain type: Translated [ 0.031213] iommu: DMA domain TLB invalidation policy: strict mode [ 0.041005] SCSI subsystem initialized [ 0.041393] usbcore: registered new interface driver usbfs [ 0.041433] usbcore: registered new interface driver hub [ 0.041472] usbcore: registered new device driver usb [ 0.042110] Advanced Linux Sound Architecture Driver Initialized. [ 0.043102] vgaarb: loaded [ 0.043395] clocksource: Switched to clocksource riscv_clocksource [ 0.044082] pnp: PnP ACPI: disabled [ 0.050887] NET: Registered PF_INET protocol family [ 0.051136] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.055086] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.055157] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.055183] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.055356] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.056405] TCP: Hash tables configured (established 32768 bind 32768) [ 0.056586] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.056878] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.057500] RPC: Registered named UNIX socket transport module. [ 0.057520] RPC: Registered udp transport module. [ 0.057530] RPC: Registered tcp transport module. [ 0.057539] RPC: Registered tcp-with-tls transport module. [ 0.057549] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.073635] cpu0: scalar unaligned word access speed is 1.91x byte access speed (fast) [ 0.073641] cpu1: scalar unaligned word access speed is 1.99x byte access speed (fast) [ 0.073645] cpu4: scalar unaligned word access speed is 1.73x byte access speed (fast) [ 0.073649] cpu2: scalar unaligned word access speed is 2.73x byte access speed (fast) [ 0.073648] cpu3: scalar unaligned word access speed is 2.31x byte access speed (fast) [ 0.073654] cpu6: scalar unaligned word access speed is 2.35x byte access speed (fast) [ 0.073654] cpu5: scalar unaligned word access speed is 2.20x byte access speed (fast) [ 0.073657] cpu7: scalar unaligned word access speed is 5.78x byte access speed (fast) [ 0.078289] PCI: CLS 0 bytes, default 64 [ 0.078561] Unpacking initramfs... [ 0.079887] workingset: timestamp_bits=46 (anon: 41) max_order=20 bucket_order=0 (anon: 0) [ 0.080962] NFS: Registering the id_resolver key type [ 0.081017] Key type id_resolver registered [ 0.081030] Key type id_legacy registered [ 0.081065] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.081081] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.081358] 9p: Installing v9fs 9p2000 file system support [ 0.081649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.081913] io scheduler mq-deadline registered [ 0.081937] io scheduler kyber registered [ 0.081992] io scheduler bfq registered [ 0.086826] riscv-plic: interrupt-controller@e0000000: mapped 160 interrupts with 8 handlers for 16 contexts. [ 0.095629] Freeing initrd memory: 2404K [ 0.140736] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.151846] loop: module loaded [ 0.154479] e1000e: Intel(R) PRO/1000 Network Driver [ 0.154510] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.155418] usbcore: registered new interface driver uas [ 0.155482] usbcore: registered new interface driver usb-storage [ 0.155670] mousedev: PS/2 mouse device common for all mice [ 0.187940] mmc0: SDHCI controller on d4281000.mmc [d4281000.mmc] using ADMA [ 0.188253] usbcore: registered new interface driver usbhid [ 0.188268] usbhid: USB HID core driver [ 0.188767] riscv-pmu-sbi: SBI PMU extension is available [ 0.188814] riscv-pmu-sbi: 16 firmware and 18 hardware counters [ 0.191317] NET: Registered PF_INET6 protocol family [ 0.192581] Segment Routing with IPv6 [ 0.192651] In-situ OAM (IOAM) with IPv6 [ 0.192721] NET: Registered PF_PACKET protocol family [ 0.192783] 9pnet: Installing 9P2000 support [ 0.192885] Key type dns_resolver registered [ 0.221693] d4017000.serial: ttyS0 at MMIO 0xd4017000 (irq = 15, base_baud = 907421) is a XScale [ 0.221763] printk: legacy console [ttyS0] enabled [ 1.108693] /soc/i2c@d401d800/pmic@41: Fixed dependency cycle(s) with /soc/i2c@d401d800/pmic@41/regulators/buck5 [ 1.111080] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 1.124366] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB [ 1.131630] mmcblk0: p1 p2 p3 p4 p5 p6 [ 1.133886] mmcblk0boot0: mmc0:0001 AJTD4R 4.00 MiB [ 1.135980] spacemit-p1-rtc spacemit-p1-rtc.2.auto: registered as rtc0 [ 1.139529] mmcblk0boot1: mmc0:0001 AJTD4R 4.00 MiB [ 1.144658] spacemit-p1-rtc spacemit-p1-rtc.2.auto: hctosys: unable to read the hardware clock [ 1.150952] mmcblk0rpmb: mmc0:0001 AJTD4R 4.00 MiB, chardev (242:0) [ 1.159108] sdhci-spacemit d4280000.mmc: Got CD GPIO [ 1.203672] mmc1: SDHCI controller on d4280000.mmc [d4280000.mmc] using ADMA [ 1.210308] spacemit-k1-pcie ca400000.pcie: host bridge /soc/pcie-bus/pcie@ca400000 ranges: [ 1.210348] spacemit-k1-pcie ca800000.pcie: host bridge /soc/pcie-bus/pcie@ca800000 ranges: [ 1.210664] clk: Disabling unused clocks [ 1.210992] PM: genpd: Disabling unused power domains [ 1.211003] ALSA device list: [ 1.211007] No soundcards found. [ 1.216611] spacemit-k1-pcie ca400000.pcie: IO 0x009f002000..0x009f101fff -> 0x0000000000 [ 1.225073] spacemit-k1-pcie ca800000.pcie: IO 0x00b7002000..0x00b7101fff -> 0x0000000000 [ 1.228992] spacemit-k1-pcie ca400000.pcie: MEM 0x0090000000..0x009effffff -> 0x0090000000 [ 1.234177] spacemit-k1-pcie ca800000.pcie: MEM 0x00a0000000..0x00afffffff -> 0x00a0000000 [ 1.275860] spacemit-k1-pcie ca800000.pcie: MEM 0x00b0000000.[ 1.340127] spacemit-k1-pcie ca400000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G [ 1.381042] mmc1: new UHS-I speed SDR104 SDHC card at address 0001 [ 1.385371] mmcblk1: mmc1:0001 MSSD0 29.2 GiB [ 1.387651] spacemit-k1-pcie ca800000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G [ 1.393883] mmcblk1: p1 p2 p3 p4 p5 p6 p7 [ 1.439421] spacemit-k1-pcie ca400000.pcie: PCIe Gen.1 x2 link up [ 1.443207] spacemit-k1-pcie ca400000.pcie: PCI host bridge to bus 0001:00 [ 1.449954] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.455478] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] [ 1.461819] pci_bus 0001:00: root bus resource [mem 0x90000000-0x9effffff] [ 1.468859] pci 0001:00:00.0: [1e5d:3003] type 01 class 0x060400 PCIe Root Port [ 1.476221] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x000fffff] [ 1.482187] pci 0001:00:00.0: BAR 1 [mem 0x00000000-0x000fffff] [ 1.488187] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 1.493488] pci 0001:00:00.0: bridge window [io 0x0000-0x0fff] [ 1.499646] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 1.506522] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 1.514408] pci 0001:00:00.0: supports D1 [ 1.518421] pci 0001:00:00.0: PME# supported from D0 D1 D3hot D3cold [ 1.527242] pci 0001:01:00.0: [8086:f1a5] type 00 class 0x010802 PCIe Endpoint [ 1.532397] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 1.539238] pci 0001:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x2 link at 0001:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 lin) [ 1.554125] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.560595] pci 0001:00:00.0: BAR 0 [mem 0x90000000-0x900fffff]: assigned [ 1.567460] pci 0001:00:00.0: BAR 1 [mem 0x90100000-0x901fffff]: assigned [ 1.574320] pci 0001:00:00.0: bridge window [mem 0x90200000-0x902fffff]: assigned [ 1.581903] pci 0001:01:00.0: BAR 0 [mem 0x90200000-0x90203fff 64bit]: assigned [ 1.589355] pci 0001:00:00.0: PCI bridge to [bus 01] [ 1.594337] pci 0001:00:00.0: bridge window [mem 0x90200000-0x902fffff] [ 1.601219] pci_bus 0001:00: resource 4 [io 0x0000-0xfffff] [ 1.606936] pci_bus 0001:00: resource 5 [mem 0x90000000-0x9effffff] [ 1.613282] pci_bus 0001:01: resource 1 [mem 0x90200000-0x902fffff] [ 1.619913] pcieport 0001:00:00.0: PME: Signaling with IRQ 23 [ 2.355402] spacemit-k1-pcie ca800000.pcie: Device found, but not active [ 2.359722] spacemit-k1-pcie ca800000.pcie: PCI host bridge to bus 0002:00 [ 2.366540] pci_bus 0002:00: root bus resource [bus 00-ff] [ 2.372081] pci_bus 0002:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x0000-0xfffff]) [ 2.381422] pci_bus 0002:00: root bus resource [mem 0xa0000000-0xafffffff pref] [ 2.388827] pci_bus 0002:00: root bus resource [mem 0xb0000000-0xb6ffffff] [ 2.395862] pci 0002:00:00.0: [1e5d:3003] type 01 class 0x060400 PCIe Root Port [ 2.403216] pci 0002:00:00.0: BAR 0 [mem 0x00000000-0x000fffff] [ 2.409194] pci 0002:00:00.0: BAR 1 [mem 0x00000000-0x000fffff] [ 2.415190] pci 0002:00:00.0: PCI bridge to [bus 01-ff] [ 2.420478] pci 0002:00:00.0: bridge window [io 0x100000-0x100fff] [ 2.427000] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 2.433880] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 2.441767] pci 0002:00:00.0: supports D1 [ 2.445778] pci 0002:00:00.0: PME# supported from D0 D1 D3hot D3cold [ 2.454787] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.458948] pci 0002:00:00.0: BAR 0 [mem 0xb0000000-0xb00fffff]: assigned [ 2.465798] pci 0002:00:00.0: BAR 1 [mem 0xb0100000-0xb01fffff]: assigned [ 2.472671] pci 0002:00:00.0: PCI bridge to [bus 01] [ 2.477698] pci_bus 0002:00: resource 4 [io 0x100000-0x1fffff] [ 2.483697] pci_bus 0002:00: resource 5 [mem 0xa0000000-0xafffffff pref] [ 2.490476] pci_bus 0002:00: resource 6 [mem 0xb0000000-0xb6ffffff] [ 2.497118] pcieport 0002:00:00.0: PME: Signaling with IRQ 24 [ 2.503842] Freeing unused kernel image (initmem) memory: 2404K [ 2.508744] Run /init as init process Saving 256 bits of non-creditable seed for next boot Starting syslogd: OK Starting klogd: OK Running sysctl: OK Starting network: OK Starting dhcpcd... dhcpcd-10.2.4 starting [ 6.599410] random: crng init done no valid interfaces found Starting crond: OK Welcome to Buildroot buildroot login: root #